SolidDrive

SD1 – Drywall Installation

SD1 – Drywall Installation
The SolidDrive utilizes patent-pending dual-voice coil technology in an aluminum enclosure to transfer acoustic energy to any substrate. Symmetrically opposed neodymium magnets and specifically engineered mounting hardware results in hidden planar-source acoustics. The result is acoustical uniformity throughout the listening space....

SD1g – Glass Applications

SD1g – Glass Applications
Attaches to glass and other nonporous surfaces using double-sided adhesive disk (included). Each SD1g is designed for one channel of audio. An optional equalization module (listed below) optimizes the SD1g for use on glass....

SD1sm – Wood Applications

SD1sm – Wood Applications
Attaches to wood and similar surfaces using included wood screws. Each SD1sm is designed for one channel of audio. An optional equalization module (listed below) optimizes the SD1sm for use on wood surfaces....

SD1 Desktop Kit 250

SD1 Desktop Kit 250
The SolidDrive SD1 Desktop Kit-250 is the ideal way to see how the SolidDrive works on any surface. The SolidDrive unit in the kit has a special silicon backing so it will work with virtually any surface without scratching or leaving a mark. The kit is also includes the SD-250 amplifier. This is a 50 watts rms per channel amplifier that can run in stereo, mono, or bridged with balanced or unbalanced inputs. But most importantly it has custom electronic EQs for glass, sheet rock, wood, or bypass. Having the correct power and the right EQ will make the AD sound...

IW200

Dual 8″ In-Wall Subwoofer with Sealed Enclosure
Create deep, accurate bass without altering a room’s design. Easily mount between standard wall studs. Contains patented subwoofer technology. Blend into any room’s decor. Combine with the SolidDrive to create the ultimate “in-wall” home theater system.** The IW-200 is an in-wall subwoofer with a sealed enclosure. The sub enclosure box mounts easily between 16″ on-center wall studs, and its vibration-isolating outer foam layer virtually eliminates the risk of buzzing and wall rattling. Recommended for rooms up to 3,300 cubic feet in volume. Larger rooms can simply use multiple IW-200 subwoofers. Features a 7-year warranty....

IW210

10″ In-Wall Subwoofer with 10″ Bass Radiator in Sealed Enclosure & Positive Clamping Mounting System
The new IW-210 from Phase Technology is a dual 10” in-wall sub. Easily installed post-construction, its small size (22”H x 13”W x 3.875”D) is capable of big sound because of the newly designed low-profile 10” subwoofers developed in-house by Phase Tech. Shipped with a magnetic, no-bezel grille, it blends perfectly into any space. Easy installation, great sound and beautiful looks – the IW210 has it all. Matching P350 amplifier available....

SD-250

SD-250 Amplifier
34 dB maximum gain with 2 x 50 watt output. Three operating modes: stereo, mono or bridged mono. Three SolidDrive EQ settings for drywall, wood and glass, plus a full-range flat option (no EQ). Three user selectable inputs: balanced stereo euroblock, stereo unbalanced mini jack, or high level euroblock. External 12-32 V trigger. Signal detecting auto standby to conserve energy. Dual concentric gain controls for independent channel control. 20 Hz- 20 kHz frequency response. Rugged aluminum housing....

P350 Mono / Class-G High-Current Amplifier

P350 Class-G High Current Mono Block Amplifier
The P350 is the companion amplifier to Phase Technology custom in-wall subwoofer systems but its use is not limited to only subwoofer applications. It also has the flexibility of operation as a full range high current, high performance, mono-block audio power amplifier. The P350 is designed to be used with SoundTube, SolidDrive, Rockustics, and Phase Technology. When using with outdoor products, the amp should be located indoors or in a weather-proof encasing....